Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Dallas
If your roof has been hit by hail, torn by wind, or is simply showing its age, you need a roofing company in Dallas that understands what this weather does to shingles, flashing, and decking. At Tilehurst Roofing Dallas, we answer the phone 24/7 and schedule on-the-ground inspections across Dallas neighborhoods the same week, not the same month. Call (903) 499-4275 and you’ll get a written price before any work starts. That’s been the standard since our Kingswell family of Roofing Company operations began in 2000, and it’s the standard you should hold us to.
Dallas is a big, car-dependent city. When a storm rolls through, roofers come from everywhere. We live and work here. Our crews know the difference between a Carrollton tract home’s steep slope and a flat commercial deck near downtown. That local knowledge matters when you’re deciding what a repair actually needs and what it should cost.
Why Tilehurst Roofing Dallas Is Dallas’s Preferred Roofing Company
Dallas homeowners have been burned before. A crew knocks on your door after a hailstorm, gives a verbal price, tears off the roof, and suddenly the number changes. Or they finish the job, leave, and stop answering the phone when the same leak reappears two weeks later. That’s the market Tilehurst was built for. Every job starts with a written price, and every repair carries a written guarantee delivered before the crew leaves your driveway.
Our reputation in Dallas comes from the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Under the 365-Day Done Right Promise, if a repair doesn’t hold, we return free of charge inside the guarantee period. No chasing, no voicemail tags. A live person answers every call, including weekends and nights.
Greg Holloway leads the Dallas team with a focus on storm response and insurance-facing documentation. The techs who climb your roof are background-checked and uniformed. You’ll know who’s up there and why they’re recommending what they’re recommending.
Styles & brands we work with
Commercial Roofing in Dallas
Commercial Roofing in Dallas means flat and low-slope membranes, TPO, modified bitumen, and metal retrofit systems across a city where commercial stock ranges from small strip centers in Oak Cliff to warehouse cores south of downtown. We handle roof replacements, leak repairs, and ongoing maintenance for Dallas business owners who can’t afford to have water coming through the deck on a Monday morning.
Low-Slope Leak Repairs
Flat roofs fail differently than shingle roofs. Pooling water in a low spot, a failed seam, or a cracked penetration can let water into a tenant space slowly over months. For Dallas commercial properties, we inspect seams, flashing, and drains, then put what we find in writing before any repair starts. Most small commercial repairs in Dallas run $650 – $1,800, depending on the membrane type and the number of penetrations.
Commercial Roof Replacement
When a Dallas flat roof reaches 15 – 20 years, patching no longer makes sense. A full TPO or mod-bit replacement usually lands between $6 and $12 per square foot, with metal retrofit systems running higher depending on fastener patterns and existing decking. Every quote includes the City of Dallas permit and both required inspections for re-roofing work.
Metal Roof Installation in Dallas
Metal Roof Installation in Dallas has grown because standing seam and exposed fastener panels handle hail and high wind better than most asphalt options. A Dallas homeowner choosing metal for a 1,800 – 2,400 sq ft roof should expect to pay $15,000 – $32,000 installed, with gauge, coating, and profile driving most of the spread. That’s a real range, not a guess.
Standing Seam Panel Roofing
Standing seam carries a hidden fastener system that doesn’t loosen the way exposed screws can after years of thermal movement. It meets ASTM D3161 Class F (110 mph) wind-load standards with the right decking and underlayment, which makes it a solid choice for Dallas’s wind-battered exposures. The material is also quieter in hail, and because panels run vertically, there are fewer horizontal seams for wind-driven rain to find.
Exposed Fastener Metal Roofs
Exposed fastener panels cost less upfront, often $9 – $12 per square foot including tear-off and replacement decking sections. The tradeoff is screw maintenance over time. With Dallas’s heat and hail, we recommend replacing the neoprene washers every several years and checking the fasteners after major storms.
Trusted Brands We Service in Dallas
Tilehurst Roofing Dallas installs and services materials from seven major manufacturers: GAF, Certainteed in Dallas, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters because a storm crew carrying one house brand will sell you what’s on the truck, not what your roof needs. For Dallas homes, we commonly install Atlas Pinnacle Impact and CertainTeed Landmark architectural shingles on steep slopes, and Tamko and IKO options when the budget or building style dictates. Having local access to all seven means a like-for-like repair can match what’s already on your roof, not force a visible patch.
See the difference
Before
After
Before
After
Before
AfterCommon Roofing Company Problems We See in Dallas Homes
- North-facing slope hail damage. After a Dallas hail event, the north-facing slopes take the worst of it because of prevailing storm wind direction. Adjusters rarely climb, so if your roofer doesn’t photograph those hits, the claim shrinks or gets denied. We check the north slope first, every time.
- Decking rot under old shingles. Dallas’s humid subtropical climate means long-term leaks rot OSB decking beneath the shingles long before the ceiling stains show. In older bungalows near White Rock Lake and East Dallas, that rot often extends under valleys and around chimneys.
- Granule loss from 100°F summers. Weeks of triple-digit heat bake asphalt shingles and accelerate granule shed. On Dallas roofs from the 1990s and 2000s, this is often the reason a roof looks bare in patches long before the leaks arrive.
- Ice damming on poorly ventilated roofs. Dallas gets a few hard freezes each winter. Ice damming forms at the eaves when attics aren’t ventilated and heat rises. It’s less common here than up north, but when it hits, it tears up drip edge and fascia.
Pricing for Roofing Company in Dallas, TX
Here’s what things cost in Dallas right now. A typical asphalt shingle Roof Replacement in Dallas lands between $8,500 and $18,000 for most single-family homes. Roof repairs run $450 – $1,900 depending on the failed component, the roof pitch, and whether the decking below needs patching. A full tear-off and replacement with architectural shingles runs $4.50 – $6.50 per square foot including new underlayment, drip edge, and ridge cap. Metal roofing in Dallas runs $9 – $14 per square foot installed, and a flat or low-slope commercial roof replacement runs $6 – $12 per square foot.
What shifts your number: roof pitch, the condition of the decking, whether you have two existing layers to tear off, and the manufacturer you choose. What should not shift your number: whatever the salesperson feels like adding after the tear-off starts. At Tilehurst Dallas, the price is written before any work and stands until the job is done. Call (903) 499-4275 to schedule your free estimate.
We Also Serve Cities Near Dallas
Our crews work throughout the Dallas metro, including Irving, Addison, Carrollton, and DeSoto. If you’re in one of those suburbs and need a Roofing Company that shows up with a written price, the same team that serves Dallas handles your area too. The permit and wind-load requirements follow the same Texas standards we work inside Dallas every day.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Dallas
Dallas re-roofing requires the roof covering to meet ASTM D3161 Class F (110 mph) or UL 2390 wind-load standards under the 2018 IRC with Texas amendments. That means the shingles, the underlayment, and the edge attachment all have to hold together as a system, not just the top layer. Call (903) 499-4275 and we’ll tell you whether your existing roof meets that mark and what a compliant replacement includes.
Yes. Re-roofing in the City of Dallas requires a permit, and the job must pass two inspections: a rough inspection and a final inspection. The only exception is a like-for-like repair under 100 square feet. A roofer who skips the permit is saving you a few hundred dollars and leaving you exposed on the insurance side later. We pull the permit on every full replacement and schedule both inspections before we hand you the final invoice.
When your Dallas roof is replaced with a system that meets the 110 mph wind-load standard, the documentation goes with the job: permit number, inspection dates, manufacturer specs, and photos. After a storm, that documentation supports the claim. Without it, an adjuster can deny a hail or wind claim on the argument that the roof wasn’t installed to code in the first place. Tilehurst Dallas documents every step and provides it before the adjuster’s second visit.
Because Dallas’s prevailing storm winds drive hail into the north-facing exposures hardest. Shingles there show bruising, granule loss, and cracked sealant strips that the south and east slopes often don’t. Insurance adjusters usually inspect from the ground or only on easily accessible slopes, so the roofer has to take the photos that prove the damage. We check the north face first, then document it.
A compliant quote should list the wind-load rated shingle or metal system, the underlayment type, the permit cost, both inspection scheduling dates, and a written guarantee on the work. A cheap quote often quotes 3-tab shingles that don’t meet the 110 mph standard and omits the permit entirely. You’ll pay less that week and more after the next storm. Call (903) 499-4275 for a quote that won’t need to be explained later.
One last thing. Last spring we re-roofed a 1987 tract home in Lake Highlands after a hailstorm. Our tech found granule loss and a cracked decking panel on the north-facing slope. We replaced the OSB, installed CertainTeed Landmark architectural shingles with a 130 mph wind rating, added ice and water shield in the valleys, and scheduled the city’s required re-roof inspection before the insurance adjuster’s second visit. The homeowner got their claim through without a fight. That’s the job done right.
Call (903) 499-4275 to schedule your free estimate. A live person answers, any time of day or night.
Written by Greg Holloway, Owner at Tilehurst Roofing Dallas, serving the Dallas area under the Kingswell Guarantee.