Boral Roofing Company Nationwide

Boral Roofing Company in Dallas: What to Know First

We’re an independent Boral roofing company serving Dallas homeowners with repair, replacement, and inspection work on Boral tile and stone-coated steel systems. Most Boral jobs in Dallas take 1 to 3 days once materials are on site, and every job starts with a written price before any work begins. If you own a Boral roof and need a company that knows the product, call (903) 499-4275 and we’ll walk it with you.

Call (903) 499-4275

How Boral Products Fail – and How We Fix Them

• Boral Concrete Tile – Crown cracking at the headlap. On Boral’s standard flat-profile concrete tiles, we see hairline fractures where each tile overlaps the row below, usually after a decade of Dallas freeze-thaw cycles. Water seeps into the crack, sits against the tile’s core, and slowly widens the break over winter. The fix is careful tile replacement at the fractured units, not a smear of sealant that gives out in two years. We also check the underlayment beneath, because cracked tile often means the felt has been getting wet for a while, and that’s the real conversation to have.
• Boral Steel (stone-coated) – Batten corrosion behind the barrel profile. Boral’s steel roofing products, like the stone-coated steel tiles used on a lot of Dallas custom homes, ride on metal battens. When a fastener backs out or a grommet degrades, moisture gets trapped between the panel and batten and starts eating the galvanized layer. You won’t see it from the ground. You’ll see it as a rust streak on the fascia after a hard rain, or a soft spot if you press a toe on the edge row. We pull the affected panels, replace the battens and fasteners, and re-seat the tile with the same profile Boral’s system requires.
• Boral Concrete Tile – Nose-lug breakage at the eave course. The bottom row of Boral tile hangs on the eave riser, and those nose lugs take the brunt of every wind gust and every unlucky ladder placement. On Dallas homes with taller eave profiles, a snapped lug means the tile still looks fine from the street but will slide out of position with a good gust. We don’t patch these. We replace the tile and re-dress the eave riser so the next tile locks the way Boral engineered it.
• Boral Roof Tile – Color fade and surface erosion on lighter colors. Boral’s lighter concrete tiles, particularly terracotta and buff tones, absorb Dallas sun at a different rate than darker profiles. Over 15 or 20 years, the color coat wears thin on the high points of the profile, which is normal, but it also means the tile’s protective surface is thinning. Owners sometimes mistake this for purely cosmetic aging. We flag it as a sign the tile is entering its second half of life, and we talk honestly about whether you repair the affected slope or plan a full replacement within a few years.
• Boral Steel – Flashing separation at sidewall transitions. Stone-coated steel is dimensionally stable, but the house moves. On Boral steel roofs across Dallas, the most common leak is not the panel; it’s the step flashing where the roof plane meets a stucco or brick wall. The metal flashings were never re-sprung after the original install, so they pull away from the wall over time and let wind-driven rain get behind them. We cut, re-form, and properly interleave the step flashing under the Boral panel, then seal the wall-side reglet with a polyurethane that moves with the wall. This is a two-hour fix that prevents a two-week ceiling repair.

Our Boral Roofing Company Process

1. 1
   You call, a person answers. That’s Greg Holloway or a member of his Dallas crew, not a call center. We listen, pull up your address, and give you a real arrival window.
2. 2
   One of us walks the roof. Greg walks every Boral job himself before quoting a number. He checks tile condition, underlayment, flashings, and the decking beneath any suspect areas. You get the findings in plain language, including the stuff that’s fine and doesn’t need touching.
3. 3
   You get a written price. Before any work starts, every line item is in front of you. Boral tile, battens, underlayment, flashing, labor, disposal. No number at the door, no “we’ll figure it out later.” Price before we touch it. That’s just how a roof conversation ought to start.
4. 4
   We do the work, using the right Boral parts. When Boral tile or steel panels need replacing, we source OEM Boral profiles where available. When a manufacturer part is discontinued or backordered, we use quality aftermarket alternatives that match the profile, and we tell you exactly what’s going on before it goes on. No surprises.
5. 5
   We test and document. Every repair gets a water test where possible, and every job gets photographed before we leave. You see what we saw.
6. 6
   You get a written guarantee. It’s handed to you or emailed before the crew pulls out, not mailed three weeks later. If a Boral repair fails inside the guarantee period, we come back at no charge under the 365-Day Done Right Promise.

What Boral Roofing Company Costs in Dallas

Here’s what we tell Dallas Boral owners to expect, in real dollars:

• Tile replacement (a few cracked Boral concrete tiles): $350 – $700. Most jobs are on the lower end unless the underlayment beneath is compromised.
• Valley or flashing repair on a Boral tile or steel roof: $450 – $1,200 depending on how much flashing we’re re-forming and how many transitions are involved.
• Underlayment replacement under Boral tile (one roof section): $1,800 – $4,500. This is the bigger jobs that some companies skip over, and it’s where most tile roofs actually leak.
• Full Boral tile roof replacement in Dallas: $28,000 – $55,000 on a typical 2,000 – 3,000 sq ft home, depending on the Boral profile, roof complexity, and whether the existing decking is still solid. Stone-coated steel runs $22,000 – $42,000.

What moves the price? Roof pitch and story height (steeper and higher costs more in labor and safety setup), the condition of your existing underlayment and decking, and whether Boral’s current profiles match what was originally installed. Every Boral quote from us is a written, line-item price. Call (903) 499-4275 for your exact number. The estimate is free.

Why Dallas Homeowners Call Tilehurst Roofing Dallas for Boral Work

We’ve already walked these roofs. Tilehurst Roofing Dallas is part of the Kingswell family of roofing companies, founded in 2000, and built for homeowners who have already been burned by a contractor that didn’t show or changed the price at the door. Every job gets a written price before any work starts and a written guarantee before the crew leaves. We carry material options from seven major manufacturers, including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so when a Boral repair isn’t the smart long-term move, you’re not locked into whatever happens to be on our truck. Our techs are background-checked and uniformed, and a live person answers our phones 24/7. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.

FAQs