Tamko Roof Replacement Nationwide

Tamko Roof Replacement in Dallas: What to Know First

Tamko roof replacement in Dallas typically runs $9,800 – $16,400 for a standard single-family home, with most jobs completed in 2 – 4 days once materials hit the driveway. We’re an independent Tamko service provider, not a manufacturer-authorized shop, which means we replace what’s failing on your roof without pushing you toward a tear-off you don’t need. If you’re reading this because your Tamko shingles are cracking, curling, or leaking and you want a straight answer on cost before anyone climbs a ladder, call (903) 499-4275. Greg Holloway walks every Tamko roof himself before quoting a number, and the written price stays the written price. No change orders at the door, no “discovered damage” surprises halfway through the job.

Call (903) 499-4275

This page is for Dallas homeowners who already own a Tamko roof and want to know what replacement looks like, what it costs, and what goes wrong with these specific shingles in this specific climate. We’ll walk through all of it.

How Tamko Products Fail – and How We Fix Them

Tamko makes a solid shingle, but every brand has failure patterns. In Dallas, we see the same handful of issues on Tamko roofs year after year. Here’s what actually goes wrong and how we handle it on a replacement:

• Heritage Series granule loss and premature cracking. The Tamko Heritage line is a popular architectural shingle in Dallas subdivisions, but the older runs from roughly 2008 – 2016 tend to lose granules faster than expected under Texas sun. You’ll see bare patches on south-facing slopes and granules piling up in gutters. When granule loss exposes the asphalt mat, UV breaks the shingle down fast. We replace the entire affected slope rather than patching, because patching an already-sun-damaged field just moves the failure point a few feet over.
• Elite Glass-Seal sealant strip failures on steep pitches. Tamko’s 3-tab Elite Glass-Seal line relies on a heat-activated sealant strip to lock shingles down. On steep Dallas roofs, we’ve found that sealant strips sometimes never fully activate if the roof was installed in cool weather or if the shingles sat too long before install. Wind then lifts the tabs, and water walks underneath. A full replacement gives us a clean deck to work with, and we make sure every shingle is hand-seated properly, not just nailed and hoped for.
• Deck rot under Tamko StormFighter and Proline roofs with older felt underlayment. Many Dallas homes with Tamko shingles from before 2015 sit on original 15-pound felt, not synthetic underlayment. Once a leak starts, that felt soaks like a sponge and rots the OSB decking beneath. We regularly open up Tamko roofs in Richardson and Mesquite where the shingles look fine from the curb but the decking underneath has gone soft. During replacement, we replace all compromised decking before the new Tamko system goes down.
• Hip and ridge cap cracking on Heritage Woodgate runs. Tamko’s hip and ridge caps take direct sun at a different angle than the field shingles, and the Woodgate color runs we’ve seen in Dallas tend to crack at the fold line after 12 – 15 years. The cap is your roof’s spine. When it fails, water gets into the ridge line and runs down inside walls. On a full replacement, we bend every cap shingle to settle it properly instead of forcing it into place, which is what causes most cap cracking in the first place.
• Improper nail placement on Tamko installs from previous contractors. This isn’t a Tamko defect. It’s a Tamko roof installed wrong. Tamko specifies a 5-nail pattern per shingle, but plenty of crews shortcut with four, and plenty more nail too high, above the common bond line. Once the shingle lifts, the nails tear through and the shingles slide. When we replace a Tamko roof, we pull enough of the old field to check how it was originally installed, because that tells us whether the whole roof needs to come off or whether sections are still sound.

Our Tamko Roof Replacement Process

Every Tamko replacement follows the same path, and it starts before we touch the roof. Here’s how it works:

1. 1
   Call and schedule the walk. A live person answers. Always. We put you on the calendar for a specific window, and Greg or a senior tech shows up in it.
2. 2
   The walk itself. We get on the roof, not just a ladder peek from the edge. We check granule condition, sealant strip activation, decking feel, flashing, ventilation, and the condition of the existing Tamko underlayment.
3. 3
   The written price. You get a line-item quote before any work starts. It shows the Tamko shingle line, the underlayment, the decking replacement footage, the drip edge, the ridge cap, and the labor. No rounding, no “allowance” numbers, no fine print hiding the real cost.
4. 4
   Materials and scheduling. We order the Tamko line that matches your home’s existing color and profile unless you want a change. For full replacements, that’s typically Heritage or StormFighter depending on the home’s wind exposure and your budget.
5. 5
   Replacement day. The crew strips the old system, replaces any bad decking, installs new underlayment and drip edge, lays the Tamko field shingles, caps the ridges, and re-flashes every penetration. We use OEM Tamko caps and accessory shingles where they matter, and quality aftermarket flashing components where they perform identical at better cost.
6. 6
   Cleanup and the written guarantee. We magnet-sweep the yard for nails, haul the old material, and hand you the guarantee before the crew pulls out. That guarantee runs a full year under the 365-Day Done Right Promise, and if anything fails inside that window, we come back at no charge.

What Tamko Roof Replacement Costs in Dallas

Here’s what we charge for Tamko work in Dallas. These are real 2026 numbers, not lowball teasers:

• Full Tamko Heritage architectural replacement on an average 2,200 sq ft single-story: $10,500 – $14,800, including tear-off, synthetic underlayment, drip edge, and ridge caps.
• Full Tamko StormFighter replacement on the same footprint: $12,200 – $16,400. StormFighter carries a higher wind rating and costs more per square, but it’s worth it for homes in exposed areas like Garland or Rowlett.
• Decking replacement, per 4×8 sheet: $75 – $110 per sheet, only for the sheets that actually need it. We show you the deteriorated wood before we replace it.
• Partial replacement of a single south-facing slope with Tamko Heritage to match: $3,400 – $5,900, depending on slope size and decking condition.

What moves the price? Slope count, roof pitch, decking condition, and whether you want to step up from Heritage to StormFighter. The quote accounts for all of it line by line. Call (903) 499-4275 for an exact number on your roof. Estimates are free, and the number we write down is the number you pay.

Why Dallas Homeowners Call Tilehurst Roofing Dallas for Tamko Work

We’re part of the Kingswell family of roofing companies, founded in 2000, and we operate under the Kingswell Guarantee: a written price before any work starts, a written guarantee on every job, and a free return visit if a repair fails inside the guarantee period. That’s not marketing language. It’s the way we’ve run every job since day one.

Our techs know Tamko’s product lines because we’ve torn them off and reinstalled them across Dallas for well over a decade. Greg learned the trade at Los Angeles Trade-Technical College and brought that same hands-on rigor to Texas, working roofs from Lakewood bungalows to newer builds in McKinney and Allen. And if Tamko isn’t the right product for your home’s next chapter, we also work with GAF, Owens Corning, and CertainTeed, so the recommendation fits the house, not what we happen to have stacked in the warehouse. Every technician who shows up is background-checked and uniformed, and a live person answers our phones 24/7. Price before we touch it. That’s just how a roof conversation ought to start.

FAQs