Tamko Roofing Company Nationwide

Tamko Roofing Company in Dallas: What to Know First

Tamko roofing repair in Dallas typically runs $375 – $950 for common shingle and flashing failures, and most jobs are completed the same day we diagnose them. Full Tamko re-roofs or large replacement sections usually land between $8,500 and $22,000 depending on square footage, decking condition, and the specific Tamko line you choose. We’re an independent Tamko service provider – not a manufacturer affiliate – which means we fix what’s actually wrong instead of steering you toward a replacement you don’t need.

Call (903) 499-4275

If you own a Tamko roof in Dallas and you’ve noticed granule loss in your gutters, curling shingles, or a leak after last spring’s hail, this page is for you. Call (903) 499-4275 and we’ll walk the roof, tell you what we found, and hand you a written price before any work starts.

How Tamko Products Fail – and How We Fix Them

Tamko builds a solid shingle. We install them, we repair them, and we’ve torn off enough of them to know exactly where they give out in North Texas weather. Here are the failure patterns we see most on Dallas roofs.

• Heritage and Heritage II shingle curling at the south exposure. Tamko’s Heritage line is popular across Dallas subdivisions from Lake Highlands to Richardson. After roughly 10 to 14 years of direct Texas sun, the south-facing slopes start to curl at the edges. The asphalt in the shingle mat dries faster on that side, and once the edges lift, wind gets under them and starts tearing. We replace the affected slopes and check that the ridge cap still seals properly, because a curled field shingle is often a warning that the cap is next.
• Titan XT granule loss around valley lines. Titan XT is Tamko’s heavier architectural shingle, and it holds up well until a Dallas hailstorm knocks the granules loose. We see it most in older neighborhoods around East Dallas where mature oaks drop branches and debris gets trapped in valleys. That debris acts like sandpaper every time the wind blows. The fix is a valley replacement with proper underlayment and a new run of Titan XT rather than just patching a few shingles.
• Flashing failures at chases and skylights on Tamko MetalWorks panels. Tamko’s MetalWorks stone-coated steel is a different animal entirely. The panels themselves rarely fail. What fails is the flashing where a chimney, skylight, or second-story wall meets the metal. Expansion and contraction from Dallas temperature swings – 30 degrees one morning, 70 by afternoon – pulls the sealants apart over time. We replace the flashing and re-bed the penetration so the steel itself never has to come off.
• Underlayment saturation behind Heritage Premium shingles after ice dams or heavy rain. This one surprises homeowners because the shingles look fine from the ground. But Dallas gets bursts of intense rain, and when gutters clog or a low-slope section ponds water, the underlayment beneath a Tamko shingle gets saturated. Then you get drips in the living room and no obvious shingle damage to blame. We trace the water path, replace the soaked underlayment section, and correct whatever allowed the water to stand in the first place.
• Wind-driven rain penetration at the rake edge on Tamko Elite Glass-Seal shingles. The rake edge is the sloped edge running from peak to gutter. On homes near White Rock Lake and other open exposures, wind whips around the roof edge and forces rain sideways under the outermost shingles. The fix is usually a proper drip edge installation if one wasn’t there, plus resealing the rake with the right adhesive. It’s a small repair that stops a persistent leak.

Our Tamko Roofing Company Process

Here’s how a Tamko roof repair or replacement goes with us, from the first call to the final walkthrough.

1. 1
   You call, a person answers. Dallas heat and hailstorms don’t wait for business hours, and neither do we. A live person picks up every call at (903) 499-4275, day or night.
2. 2
   Greg walks the roof himself. Before we quote a number, Greg Holloway gets on the roof and looks. Not just a ladder-peek from the gutter – he walks it, checks the decking feel underfoot, and checks the flashing points that Tamko roofs are sensitive to in this climate.
3. 3
   You get a written price before anything happens. We put the number in writing, line by line, before we touch a single shingle. Price before we touch it. That’s just how a roof conversation ought to start.
4. 4
   The repair or replacement happens with the right materials. We use Tamko’s matching lines where the warranty and appearance call for it, and we’ll tell you honestly when a quality aftermarket flashing or underlayment product does the same job better. No mystery parts, no truck-blender inventory.
5. 5
   We test, clean, and walk you through it. After the repair, we test the area – water-test if needed – then clean up the nail heads, the old flashing, the granule pile. We leave the place cleaner than we found it.
6. 6
   Before the crew leaves, you get a written guarantee. Every Tamko repair carries our written guarantee. Not a promise to mail something later. It’s in your hand before our truck leaves the driveway.

What Tamko Roofing Company Costs in Dallas

Here’s what we see across Dallas for Tamko work, as of the current market.

• Shingle replacement (isolated, 3 – 8 shingles): $275 – $525
• Flashing repair at a chimney, skylight, or wall: $350 – $750
• Valley repair or replacement with Tamko underlayment: $600 – $1,400
• Rake edge repair with drip edge installation: $450 – $900
• Full Tamko Heritage or Titan XT re-roof (1,800 – 2,400 sq ft): $8,500 – $18,000
• Tamko MetalWorks stone-coated steel roof replacement: $18,000 – $35,000

What moves the price most is the condition of the roof decking underneath. Dallas attics get hot, and decking that’s been overheated for 15 years sometimes needs sections replaced before new shingles go on. That’s the biggest variable on a re-roof. For repairs, it’s usually access – steep pitches and second-story roofs cost more because of safety equipment and time. Call (903) 499-4275 and we’ll give you an exact written quote. The estimate is free.

Why Dallas Homeowners Call Tilehurst Roofing Dallas for Tamko Work

Most of the people who call us have already been burned once. A roofer who didn’t show. A price that changed at the door. A repair that failed in a month. We built Tilehurst Roofing Dallas to be the company those folks call second.

We’re part of the Kingswell family of roofing companies, founded in 2000. That means every job follows the Kingswell Way: say the price before the work, show up in the window we gave, put the guarantee in writing, and come back if it fails. Our 365-Day Done Right Promise backs every Tamko repair for a full year. If our fix doesn’t hold, we return and correct it at no charge. You’ll find the same promise in writing on every invoice, not tucked into fine print.

And when Tamko isn’t the right call for your Dallas home – say you want a stone-coated steel roof and want to compare it against Boral or a CertainTeed alternative – we carry and service seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. You choose the product. We fix it right.

FAQs