A Tilehurst company - serving Dallas, TX

CertainTeed Underlayment & Deck Repair Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

CertainTeed Underlayment & Deck Repair: The Dallas Owner’s Guide

We stock and install CertainTeed-compatible underlayment and deck repair materials across Dallas, with most underlayment replacement jobs running $0.75 – $1.25 per square foot installed and deck section repairs starting around $450 – $900 for a typical 4×8 area. Our crews carry CertainTeed DiamondDeck, RoofRunner, and WinterGuard on the truck, so most jobs are done the same day we diagnose the problem. You usually discover this part failed one of two ways: a leak shows up on the ceiling after a North Texas storm, or you’re up in the attic and see daylight through the decking where there shouldn’t be any.

Call (903) 499-4275

Underlayment and decking are the two layers between your shingles and your living room. Underlayment is the water-shedding barrier that sits on top of the deck; the deck itself is the plywood or OSB structure that holds the whole roof together. When either fails, water gets where it doesn’t belong, and Dallas weather is not gentle about it: heavy spring rains, hail, and summer heat that bakes underlayment brittle over time all take their toll faster here than in milder climates.

Key takeaways:

  • We work with CertainTeed underlayment systems daily and stock the common products on our trucks
  • Most repairs are priced and completed the same day
  • Every job gets a written price before work starts, and a written guarantee before we leave
  • We’re an independent Dallas roofing company, not affiliated with CertainTeed, and we also carry GAF and Owens Corning parts for owners weighing options

Which CertainTeed Models This Applies To

CertainTeed makes several underlayment lines, and the one your roof needs depends on the original installation and your roof’s slope. DiamondDeck is their synthetic, high-traction underlayment used widely on re-roofs across Dallas. RoofRunner comes in both synthetic and felt versions, typically used under CertainTeed shingle systems like Landmark, XT 30, and Presidential Shake. WinterGuard is the ice-and-water shield product that matters in valleys, around chimneys, and along eaves where water concentrates during our flash-flood spring storms.

The compatibility gotcha most Dallas homeowners hit: certain CertainTeed shingle warranties require specific underlayment products to keep the warranty valid. If a contractor swaps in a generic felt when the original spec called for a synthetic like RoofRunner, the shingle warranty can be voided. We match the underlayment to the original system, not just whatever roll is cheapest that week. When we open up a roof, we check the printing on the old underlayment, measure the deck thickness (most Dallas homes are 15/32-inch or 19/32-inch OSB or plywood), and spec the replacement to match. OEM CertainTeed underlayment is what we quote by default; quality aftermarket synthetics get discussed only when the customer asks for a lower-cost option, and we’ll explain the tradeoff in plain terms before any work begins.

For deck repair, CertainTeed doesn’t manufacture structural decking, but their installation specs call for specific deck preparation and fastener patterns. We repair or replace decking to those specs so the entire system works as CertainTeed designed it.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your CertainTeed Underlayment & Deck Repair Is Failing

  • Water stains on the ceiling or walls after rain. This is the most common first symptom in Dallas. Water that gets past failed underlayment travels along the deck before it drips, so the stain is often several feet from the actual roof damage. We trace it back from inside before we touch anything outside.
  • Visible daylight through the attic roof deck. If you can see outside from your attic during the day, the deck has holes, rot, or separation. Underlayment alone won’t fix this – the deck section itself has to come out and be replaced.
  • Spongy or sagging areas on the roof you can feel from a ladder. Soft spots mean the decking underneath has absorbed water and started to rot. Walking on that area risks going through, so we mark it and work around it until the deck gets swapped.
  • Granules mixed with wood fibers in the gutter. Shingle granules are normal wear over time, but wood fibers mean the deck is degrading underneath and shedding material into the gutter line. That’s a deck problem, not just a shingle problem.
  • Rippling or buckling shingles in one section. CertainTeed shingles lay flat when installed over sound decking. When the deck swells from moisture, the shingle seams rise and wave. Repeatedly. Failed underlayment below is almost always the cause we find when we open it up.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what we quote in Dallas for CertainTeed-compatible underlayment and deck work, installed prices including labor and materials:

  • Underlayment replacement (full tear-off and reinstall, new felt or synthetic): $0.75 – $1.25 per square foot of roof area
  • Deck section replacement (4×8 sheet, including removal of rotted section and new OSB or plywood to CertainTeed spec): $450 – $900 per sheet area depending on accessibility, pitch, and how far the rot extends
  • Ice-and-water shield in valleys and around penetrations: $3 – $6 per linear foot
  • Full re-deck over existing (when the whole roof needs new decking applied over old): $1.50 – $2.50 per square foot

The range moves on three things: roof pitch (steeper roofs take more labor and safety setup), how many layers we’re removing, and whether the deck rot spread past the visible soft spot. Greg Holloway walks every roof himself before a number goes on paper, so what we quote is what the job costs. If we open the roof and find more rot than we could see, we stop, show you photos from the roof, and give you an updated written price before we proceed. The Kingswell Way is to say the price before the work, not after. Every repair gets a written guarantee before the crew leaves, and if that repair fails inside the year, we come back and fix it at no charge under the 365-Day Done Right Promise.

DIY or Call Us?

What you can safely do: check your attic after a rain with a flashlight, look for water trails on the underside of the deck, and mark any spots that look dark or soft. Take cell phone photos. That’s real, useful information for us. What you shouldn’t do: cut into your own roof deck from above to inspect or replace a section. Removing decking means cutting around structural supports, matching fastener patterns to CertainTeed installation specs, and not compromising the roof’s load path. You’re also working at height on a surface that’s already compromised, and a Dallas roof in July doesn’t need to be any hotter than it already is in direct sun. If you’ve got a leak or suspect deck damage, call us at (903) 499-4275. We’ll walk the roof, take our own photos, and put a written price in your hands before anything gets touched. Price before we touch it. That’s just how a roof conversation ought to start.

FAQs

Need Roofing help in Dallas? Licensed & insured · Free written quotes response · free estimates
Call (903) 499-4275
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Tilehurst Roofing Dallas responds fast. No obligation.

By clicking submit, you agree to the terms of our Privacy Policy and consent to being contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch