A Tilehurst company - serving Dallas, TX

GAF Roof Repair Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

GAF Roof Repair in Dallas: What to Know First

GAF roof repair in Dallas typically runs $275 to $650 for most shingle, flashing, and leak repairs, and we can usually get a technician to your roof within a few days. We’re an independent GAF service provider, which means we repair GAF roofs using parts and methods that preserve your warranty without being tied to any manufacturer’s sales agenda. Every quote starts with a written price in your hands before a single nail goes down.

Call (903) 499-4275

This page is for Dallas homeowners who own a GAF roof and need it repaired correctly the first time. If your GAF shingles are cracked, your flashing is pulling away, or water is finding its way into the attic after last night’s storm, you’re in the right place. Call (903) 499-4275 and a live person answers, day or night.

How GAF Products Fail – and How We Fix Them

  • Timberline HDZ shingle seal failure. GAF’s Timberline line is the most common shingle we see on Dallas homes, and its biggest weak point is the seal strip. Dallas heat cycles bake the adhesive until it releases, especially on south-facing slopes. You’ll see shingles lifting at the corners after a windy night. We clean the mating surface, apply the correct adhesive, and reseat the shingle so it locks back down. If the shingle is too degraded to reseal, we replace it with a color-matched Timberline HDZ shingle.
  • Timberline UHDZ granule loss and curling. The UHDZ series is thicker and heavier than standard shingles, but Dallas hail and UV exposure take a toll on the granule coating. When granules wash into your gutters, the shingle’s asphalt layer is exposed and it dries out, curls, and eventually cracks. We inspect for bare spots, replace shingles where the mat is exposed, and check the underlayment beneath for any water that already got through. Catching this early is the difference between a $300 repair and a $4,000 decking replacement.
  • GAF Starter Strip shingle alignment problems. GAF’s starter strip shingles are designed to seal the first course and channel water off the eaves. When they were installed wrong, or when wind gets under the edge, they peel back and expose the roof deck. We replace missing starter shingles, make sure the seal strip faces the right way, and verify the drip edge is still tucked correctly beneath them.
  • Flashing failures at GAF ridge caps and valleys. Dallas thunderstorms dump water fast. When GAF Seal-A-Ridge or TimberTex ridge caps crack at the fold, or when valley flashing corrodes at the seams, water follows the path of least resistance straight into your ceilings. We pull the damaged ridge caps, inspect the nails beneath, and install new caps with the proper overlap. For valleys, we replace corroded metal or weave new shingles depending on how the original roof was designed.
  • GAF Deck-Armor underlayment breaches. Most GAF systems in Dallas use Deck-Armor synthetic underlayment. It’s good material, but a torn section from a previous badly-done repair leaves the deck exposed. We find these breaches during leak investigations. The fix is cutting out the torn section, replacing it with matching synthetic underlayment, and sealing the edges so water can’t track sideways under the patch.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our GAF Roof Repair Process

  1. 1
    You call, and a real person answers. No voicemail, no callback queue. You describe what you’re seeing: a water stain, missing shingles, granules in the gutter, whatever it is.
  2. 2
    We schedule a visit and show up in the window we gave. Greg Holloway or one of our techs walks the roof, takes photos, and traces the leak to its source, not just where the water shows up inside.
  3. 3
    We give you the price before we touch anything. Written, line by line. You decide what gets fixed and what can wait. No surprise change orders at the door.
  4. 4
    We make a parts decision with your warranty in mind. When OEM GAF shingles or accessories are available, we use them. When the original GAF shingle is discontinued, we match color and profile with a quality equivalent and tell you exactly what we’re installing and why.
  5. 5
    The repair gets done the same visit, whenever possible. Most shingle and flashing repairs are complete in under two hours. We water-test the area before we pack up.
  6. 6
    You get the written guarantee before we leave. Not mailed later. It states what we fixed, what it covers, and how long it covers it. If it fails inside that window, we come back at no charge under our 365-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What GAF Roof Repair Costs in Dallas

Here’s what we see on most GAF repair jobs in Dallas right now:

  • Missing or cracked shingle replacement: $275 to $425 for a small area (5-15 shingles)
  • Flashing repair at a chimney, skylight, or wall junction: $350 to $650 depending on access and how much metal needs replacing
  • Valley leak repair: $400 to $800 when we’re reweaving shingles or replacing corroded valley metal
  • Vent boot replacement (plumbing stack): $225 to $375 including the boot, sealant, and labor
  • Flat roof patch (GAF TPO or modified bitumen): $450 to $900 depending on size and number of layers

What moves the price: roof pitch (anything steeper than 7/12 adds labor), how many layers we’re dealing with, and whether decking or underlayment underneath needs repair. We’ll tell you the range on the phone and give you an exact number in writing before anything starts. Call (903) 499-4275 to schedule your free estimate.

Why Dallas Homeowners Call Tilehurst Roofing Dallas for GAF Work

We’re a Kingswell family roofing company, founded in 2000, and we built our whole process around the thing Dallas homeowners tell us they never got from the last contractor: a straight answer in writing. The Kingswell Way is simple. Say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it. Put the guarantee in writing. Come back if it fails.

Our technicians know GAF products well, but we also work with Owens Corning and CertainTeed, along with four other major manufacturers. That matters when your GAF shingle is discontinued or your roof has mixed materials. You get the product that fits your home, not whatever happens to be on the truck. Every tech is background-checked and uniformed, so you always know who’s on your roof. And if a repair fails inside the guarantee period, we return and correct it at no charge. No arguing. No re-quoting. It’s in writing.

FAQs

Need Roofing help in Dallas? Licensed & insured · Free written quotes response · free estimates
Call (903) 499-4275
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Tilehurst Roofing Dallas responds fast. No obligation.

By clicking submit, you agree to the terms of our Privacy Policy and consent to being contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch